Tearing off |
Sections of the paper may be torn off using the printers serrated edge - next to where the paper comes out. |
|
|
|
|
Use the feed button to get a manageable length of paper and/or to make sure that the printing is clear of the serrations. Less than 2 or
3 inches of paper may be difficult to tear off properly.
|
|
|
|
|
|
|
|
|
(If you're right handed). Hold the printer steady with your left hand; with your right, pull the paper across the serrations at a fairly steep angle. Don't try to pull the paper squarely across the edge all at once. |
|
|
|
|
Practice makes perfect - if you're in any doubt about the above procedure try tearing off a few strips of blank first. |